GHOSTWOOD SCOUT RIG
GHOSTWOOD SCOUT RIG
ABOUT THIS RIG:
The Ghostwood Scout belt is extremely heavy duty, with a rustic oiled pull-up leather exterior, veg tan core and lined in beautiful Horween nubuck suede. The belt ensures maximum durability, quality and comfort. This rugged western-style scout belt has extensive hand-laced detailing for a unique look that stands out from the crowd.
The Ghostwood holster is handcrafted from a blend of leathers to achieve the perfect balance of quality durability and rustic style. The exterior has been crafted using a 6 oz oiled pull-up to give the holster a rugged and distressed appearance, but built with a full grain 10 oz W&C premium veg tanned tooling leather to provide structure, protection and durability. To increase stabilization on your belt and to prevent the holster from twisting during draw, the holster has been crafted with a flared half-skirt. Accented with a laced collar, rough edges and all the natural range marks and blemishes from the life of the steer, no two holsters are exactly alike.
To purchase these items separately, please find them below
- Premium Quality Veg Tanned Leather, Materials and Craftsmanship
- Our leather is sourced from American tanneries- Wickett & Craig Tannery of Pennsylvania, Tasman Acadia Tannery of Maine & Horween Tannery of Illinois
- Stitched full length welt to increase holster strength and reduce drag upon draw
- Pre-molded for a perfect fit right out of the box
- Belt crafted from a 6oz full grain thickness veg tanned saddle skirt leather, 6oz rustic exterior leather, 4oz nubuck suede belt lining
- 2 1/2 inches wide, lined in premium Horween nubuck suede - color varies based on availability, but will compliment the main belt color you choose
- 5 belt holes are spaced 1 inch apart
- 18 laced cartridge loops - If you require a different caliber than listed, please contact us and we will be able to help you out
ABOUT OUR PRODUCTS:
Our single action holsters are modeled on the common style used in and around the beginning of the 1870's through the end of the 1890's in the American West. They will fit most single action army or replica firearms for Cowboy Action Shooting sports such as any Colt 1873 Army (Pietta or Uberti models etc), Ruger Vaquero or New Ruger Vaquero. We can also custom build these holsters to fit any revolver.
Hellhound Leather Co gun belts are handcrafted and custom fit to you. We model our gun belt styles on the common western gunbelts of the late 1800s and Hellhound gun belts are crafted from heavy weight veg tanned leather that wont sag over years of use.
All of our items at Hellhound are works of art that are made to order and handcrafted one at a time in our workshop in Utah.
These are not mass produced or made ahead of time and each holster is carefully hand cut and crafted to fit you and your firearm.
PLEASE READ BEFORE PLACING YOUR ORDER
It is very important to provide us with the correct size for your gun belt.
Gun belts are not measured the same as your standard pants belt, so please do not provide us with your pants belt size.
In order to get the most accurate fit for your gunbelt, we request that you measure yourself so that we can custom fit the belt to you.
Please follow the directions below in order to provide us with an accurate size so that we can craft a perfectly fitting belt.
Please use a fabric/soft tape measure to measure around yourself, over the clothing you might typically wear with your gunbelt, wherever you plan to wear the belt.
If you're going to wear it down on your hips, measure there.
If you're going to wear it high on the waist, measure there.
If you're going to wear it right over the top of your pants belt, then please measure around yourself over the top of your pants belt.
If we are not provided with an accurate measurement, we cannot craft a correctly fitting belt. If the belt does not fit due to an inaccurate measurement, you will be charged a recrafting fee for a replacement belt.
If you have any questions regarding measurements, please feel free to call us at 385-707-3751
Hellhound gun leathers, belts and holsters, are works of art that are made to order and handcrafted one at a time in our workshop in Utah. These are not mass produced or made ahead of time and each holster is carefully hand cut and crafted to fit your firearm.
We are a very small, custom leather shop and due to high demand, our lead times have increased.
This item is made to order, so crafting and fulfillment time may take up to 20-24 weeks.
**Regarding Cross Draw Holsters**
If you prefer a Cross Draw holster, please be aware that selecting the "Cross Draw" option will slightly alter the holster to accommodate for cross draw carry. The skirt of the holster will be shortened to the collar and widened at the belt loop to reduce twisting. Our standard cant for cross draw holsters is 20 degrees. If you would like more information on how a cross draw holster will appear or if you would like a sharper cant on your holster, please contact us.
We understand that purchasing a holster for your gun is a very personal process and we invite you to contact us with any questions, concerns or custom requests.
We are happy to take custom orders if you require modifications (such as cant degree or cross draw if you don't prefer a straight drop holster) that we do not list. If you would like to include a slight modification to your holster - Contact us for options!