WILD BILL HICKOK INSPIRED CAVALRY RIG
WILD BILL HICKOK INSPIRED CAVALRY RIG
Couldn't load pickup availability
|
ABOUT THIS RIG: An artistic recreation of the gun rig worn by Wild Bill Hickok from the western series "Deadwood", with that Hellhound Quality. Please note that this is not intended to be a perfectly exact replica, since this rig was originally crafted by an artist for use in the movie industry. We offer a rig to match the look and style of the one worn by Keith Carradine while portraying his character Wild Bill Hickok as closely as possible, in a quality in line with Hellhound standard. Please note: This rig is considered "fan art" and we make no claim that this replica is 100% exact and it is NOT the original rig. The creation of this rig was "inspired by" the movie and crafted to Hellhound quality standards. Like all Hellhound rigs, this has been handcrafted from the very best quality full grain rugged saddle skirt leather and lined in Horween nubuck suede. The heavy weight belt ensures maximum durability, quality, and comfort for those days out on the range. This rig includes two holsters that match in color and style to those portrayed in the images. Please note that the holsters will be right hand and left hand draw. Please indicate your firearm and note that this rig is meant to carry twin revolvers. If you would like two holsters for different firearms, we are happy to do that for you, please just reach out to us at gavin@hellhoundleatherco.com or call/text at 385-707-3751 |
PRODUCT DETAILS:
- Premium Quality Veg Tanned Leather, Materials and Craftsmanship
- Our leather is sourced from American tanneries- Wickett & Craig Tannery of Pennsylvania, Hermann Oak Tannery Missouri & Horween Tannery of Illinois
- Stitched full length welt to increase holster strength and reduce drag upon draw
- Pre-molded for a perfect fit right out of the box
- 10 oz full grain thickness veg tanned saddle skirt leather
- 2 oz full grain veg tan lining leather for holster
- 1 1/2 inches wide, lined in premium Horween nubuck suede
- To maintain artistic accuracy, this rig comes with twin holsters - please contact us if you need holsters for two different model pistols
- Authentic replica Civil War era solid brass sword buckle, American made
ABOUT OUR PRODUCTS:
Our single action holsters are modeled on the common style used in and around the beginning of the 1870's through the end of the 1890's in the American West. They will fit most single action army or replica firearms for Cowboy Action Shooting sports such as any Colt 1873 Army (Pietta or Uberti models etc), Ruger Vaquero or New Ruger Vaquero. We can also custom build these holsters to fit any revolver.
Hellhound Leather Co gun belts are handcrafted and custom fit to you. We model our gun belt styles on the common western gunbelts of the late 1800s and Hellhound gun belts are crafted from heavy weight veg tanned leather that wont sag over years of use.
All of our items at Hellhound are works of art that are made to order and handcrafted one at a time in our workshop in Utah.
These are not mass produced or made ahead of time and each piece is carefully hand cut and crafted to fit you and your firearm.
PLEASE READ BEFORE PLACING YOUR ORDER
SIZING INFORMATION
It is very important to provide us with the correct size for your gun belt!
Gun belts are not measured the same as your standard pants belt, so please do not provide us with your pants size or pants belt size.
In order to get the most accurate fit for your gunbelt, we request that you measure yourself so that we can custom fit the belt to you using a "true measurement".
Please follow the directions below in order to provide us with an accurate size so that we can craft a perfectly fitting belt.
Please use a fabric/soft tape measure to measure around yourself, over the clothing you might typically wear with your gunbelt, wherever you plan to wear the belt.
If you're going to wear it down on your hips, measure there.
If you're going to wear it high on the waist, measure there.
If you're going to wear it right over the top of your pants belt, then please measure around yourself over the top of your pants belt.
If we are not provided with an accurate measurement, we cannot craft a correctly fitting belt. If the belt does not fit due to an inaccurate customer measurement, Hellhound is not responsible for the error and you will be charged a recrafting fee for a replacement belt.
If you have any questions regarding measurements, please feel free to call us at 385-707-3751
FULFILLMENT TIME
Hellhound gun leathers, belts and holsters, are works of art that are made to order and handcrafted one at a time in our workshop in Utah. These are not mass produced or made ahead of time and each holster is carefully hand cut and crafted to fit your firearm.
We are a very small, custom leather shop and due to high demand, our lead times have increased.
This item is made to order, so crafting and fulfillment time may take up to 20-24 weeks.
CUSTOMIZATION
**Regarding Cross Draw Holsters**
If you prefer a Cross Draw holster, please be aware that selecting the "Cross Draw" option will slightly alter the holster to accommodate for cross draw carry. The skirt of the holster will be shortened to the collar and widened at the belt loop to reduce twisting. Our standard cant for cross draw holsters is 20 degrees. If you would like more information on how a cross draw holster will appear or if you would like a sharper cant on your holster, please contact us.
We understand that purchasing a holster for your gun is a very personal process and we invite you to contact us with any questions, concerns or custom requests.
We are happy to take custom orders if you require modifications (such as cant degree or cross draw if you don't prefer a straight drop holster) that we do not list. If you would like to include a slight modification to your holster - Contact us for options!