Skip to product information
1 of 9

GHOSTWOOD BUSCADERO DOUBLE DROP RIG

GHOSTWOOD BUSCADERO DOUBLE DROP RIG

Regular price $775.00 USD
Regular price Sale price $775.00 USD
Sale Sold out
Shipping calculated at checkout.

Please see belt measurement instructions found at the bottom of this page before ordering. Thank you! 

ABOUT THIS RIG:

The Ghostwood buscadero belt and double drop holster set is part of our very popular Ghostwood line with a rustic oiled leather exterior, a sturdy veg tan core and lined in durable Horween nubuck suede. 

The Ghostwood holster is handcrafted from a blend of leathers to achieve the perfect balance of quality durability and rustic style. The exterior has been crafted using a 6 oz oiled pull-up leather to give the holster a rugged and distressed appearance, but lined in a full grain 10 oz W&C premium veg tanned tooling leather to provide structure, protection and durability. Accented with lacing on the collar, rough edges and all the natural range marks and blemishes from the life of the steer, no two holsters are exactly alike.

PLEASE NOTE: This listing assumes twin holsters for this double drop rig. Both holsters will be crafted to fit your firearm selection in the options. If you would like the holsters to be crafted for two different guns, this is not a problem at all! Just contact us: 
gavin@hellhoundleatherco.com or you can call/text 385-707-3751

 

 

PRODUCT DETAILS:

  • Premium Quality Veg Tanned Leather, Materials and Craftsmanship
  • Our leather is sourced from American tanneries- Wickett & Craig Tannery of Pennsylvania & Hermann Oak Tannery of St. Louis of Missouri
  • Stitched full length welts to increase holster strength and reduce drag upon draw
  • Pre-molded for a perfect fit right out of the box
  • 10oz full grain thickness veg tanned leather core
  • 6oz rustic oiled pull-up leather exterior
  • Holster is 15oz total thickness
  • Belt is 18oz total thickness
  • 3 inches wide, lined in premium Horween  nubuck suede - color varies based on availability, but will compliment the main belt color you choose
  • 5 belt holes are spaced 1 inch apart
  • 18 laced cartridge loops - If you require a different caliber than listed, please contact us and we will be able to help you out



ABOUT OUR PRODUCTS:

Our single action holsters are modeled on the common style used in and around the beginning of the 1870's through the end of the 1890's in the American West. They will fit most single action army or replica firearms for Cowboy Action Shooting sports such as any Colt 1873 Army (Pietta or Uberti models etc), Ruger Vaquero or New Ruger Vaquero. We can also custom build these holsters to fit any revolver.

Hellhound Leather Co gun belts are handcrafted and custom fit to you. We model our gun belt styles on the common western gunbelts of the late 1800s and Hellhound gun belts are crafted from heavy weight veg tanned leather that wont sag over years of use.

All of our items at Hellhound are works of art that are made to order and handcrafted one at a time in our workshop in Utah.
These are not mass produced or made ahead of time and each piece is carefully hand cut and crafted to fit you and your firearm.


 

View full details

PLEASE READ BEFORE PLACING YOUR ORDER

SIZING INFORMATION

It is very important to provide us with the correct size for your gun belt!

Gun belts are not measured the same as your standard pants belt, so please do not provide us with your pants size or pants belt size.

In order to get the most accurate fit for your gunbelt, we request that you measure yourself so that we can custom fit the belt to you using a "true measurement".

Please follow the directions below in order to provide us with an accurate size so that we can craft a perfectly fitting belt.

Please use a fabric/soft tape measure to measure around yourself, over the clothing you might typically wear with your gunbelt, wherever you plan to wear the belt.
If you're going to wear it down on your hips, measure there.
If you're going to wear it high on the waist, measure there.
If you're going to wear it right over the top of your pants belt, then please measure around yourself over the top of your pants belt.


If we are not provided with an accurate measurement, we cannot craft a correctly fitting belt. If the belt does not fit due to an inaccurate customer measurement, Hellhound is not responsible for the error and you will be charged a recrafting fee for a replacement belt.


If you have any questions regarding measurements, please feel free to call us at 385-707-3751

 

FULFILLMENT TIME

Hellhound gun leathers, belts and holsters, are works of art that are made to order and handcrafted one at a time in our workshop in Utah. These are not mass produced or made ahead of time and each holster is carefully hand cut and crafted to fit your firearm.

We are a very small, custom leather shop and due to high demand, our lead times have increased.

This item is made to order, so crafting and fulfillment time may take up to 20-24 weeks. 

CUSTOMIZATION

**Regarding Cross Draw Holsters**
If you prefer a Cross Draw holster, please be aware that selecting the "Cross Draw" option will slightly alter the holster to accommodate for cross draw carry. The skirt of the holster will be shortened to the collar and widened at the belt loop to reduce twisting. Our standard cant for cross draw holsters is 20 degrees. If you would like more information on how a cross draw holster will appear or if you would like a sharper cant on your holster, please contact us.

We understand that purchasing a holster for your gun is a very personal process and we invite you to contact us with any questions, concerns or custom requests. 

We are happy to take custom orders if you require modifications (such as cant degree or cross draw if you don't prefer a straight drop holster) that we do not list. If you would like to include a slight modification to your holster - Contact us for options!